eee project                Email:

         Cell: +91-9952749533, +91-9345276362


                  Chennai , Tamil Nadu, India

Mobile View





 IEEE 2012




























  IGBT Driver


  About us



                we offer projects in PSCAD, POWER SYSTEMS, Formation of bus admittance and impedance matrices and network solution. analysis / simulation / control functions,  Quasi steady-state (Fault) analysis for balanced and unbalanced fault,   Transient stability simulation of multi-machine power system,  Parameters and Modelling of Transmission Lines,  Transient and Small Signal Stability Analysis, Single-Machine Infinite Bus System, Electromagnetic Transients in Power Systems.

                  PSCAD Project Titles

  1.  Wind modeling and simulation using PSCAD Software
  2.  MICRO GRID modeling and Transient studies in PSCAD
  3.  DFIG Studies in  using PSCAD software
  4.  PMSM modeling and simulation uisng PSCAD
  5.  VECTOR control of Drives in PSCAD
  6.  A.C drives control using PSCAD
  7.  Transmission Line modeling and studies
  8.  Renewable energy modeling and analysis
  9.  Power electronics converters in PSCAD
  10.  Induction Motor Performance studies in PSCAD
  11.  An hybrid multi level inverter based DSTATCOM control
  12.  An Improved Maximum Power Point Tracking for Photovoltaic Grid-Connected Inverter Based on Voltage-Oriented Control
  13.   An SVPWM-Based Switching Pattern for Stand-Alone and Grid-Connected Three-Phase Single-Stage Boost Inverters
  14.  Analysis and Simplification of Three-Dimensional Space Vector PWM for Three-Phase Four-Leg Inverters
  15.  Analysis of the variation effect of induction machine parameters for VECTORIAL controls
  16.  Analysis, Design, Modeling, and Implementation of an Active Clamp HF Link Converter 2011
  17.  Application of SMES Unit in Improving the Performance of an AC/DC Power System.
  18.  Assessment of Power Quality in Wind Power Systems.
  19. Cascaded multilevel voltage source inverter based active power filter for harmonics and reactive power compensation.
  20. Case study on power quality improvement of thirty bus system with UPFC
  21.  Comparative study on carrier overlapping PWM strategies for five level diode clamped inverter.
  22.  Comparison of 3-level and 9-level inverter-fed induction motor drives .
  23.  Comparison of SSSC and d-q control scheme based UPFC for power flow control.
  24.  Comparison of z-source inverter fed induction motor with traditional source inverter systems.
  25.  Comparison performance of induction motor using SVPWM and hysteresis current controller.
  26. Composite Energy Storage System Involving Battery and Ultra capacitor With Dynamic Energy Management in Micro grid Applications
  27.  Constant Frequency-Unified Power Quality Conditioner
  28.  Constant Power Control of DFIG Wind Turbines With Super capacitor Energy Storage .
  29.  Control and Analysis of the Modular Multilevel Cascade Converter Based on Double-Star Chopper-Cells.
  30. Control of a Doubly Fed Induction Generator via an Indirect Matrix Converter With Changing DC Voltage 2011.
  31.  Control Strategy for Harmonic Elimination in Stand-Alone DFIG Applications With Nonlinear Loads .
  32. Coordinated Voltage Control Scheme for SEIG-Based Wind Park Utilizing Substation STATCOM and ULTC Transformer
  33.  Damping of Low Frequency Oscillations in Power Systems with Neuro-Fuzzy UPFC Controller.
  34. Damping Power System Oscillations Using a Hybrid Series Capacitive Compensation Scheme.
  35. DC/DC Boost Converter Functionality in a Three-Phase Indirect Matrix Converter
  36.  Design and effective operation of double winding synchronous reluctance   motor.
  37.  Design and Implementation of Neuro-Fuzzy Vector Control for Wind-Driven Doubly-Fed Induction Generator.
  38. Design and simulation of UPQC to improve power quality and transfer power of photovoltaic array to grid.
  39. Design Strategy for Optimum Rating Selection of Interline DVR.
  40. Design, implementation and construction of a multilevel inverter for robot arm drive, by means of a brushless motor.
  41. Development of a Nonlinear Control Strategy for the DC Power Transferring System.
  42. Direct electromagnetic torque control of induction motors powered by high power PWM inverters for two levels or three levels.
  43. Direct electromagnetic torque control of induction motors powered by high power PWM inverters for two levels or three levels.
  44. Direct Torque and Indirect Flux Control of Brushless DC Motor.
  45. Direct Voltage Control for a Stand-Alone Wind-Driven Self-Excited Induction Generator With Improved Power Quality.
  46. Dynamic Modeling and Improved Control of DFIG Under Distorted Grid Voltage Conditions.
  47. Dynamic Modeling and Performance Analysis of a Grid-Connected Current-Source Inverter-Based Photovoltaic System.
  48. Dynamic Stability Improvement of an Integrated Grid-Connected Offshore Wind Farm and Marine-Current Farm Using a STATCOM.
  49. Energy Management and Power Control of a Hybrid Active Wind Generator for Distributed Power Generation and Grid Integration.
  50.  Energy optimization of field oriented six-phase induction motor drive
  51. Enhanced Power Quality Control Strategy for Single-Phase Inverters in Distributed Generation Systems
  52. Fault Detection and Mitigation in Multilevel Converter STATCOMs
  53. Fault Ride-Through of a DFIG Wind Turbine Using a Dynamic Voltage Restorer During Symmetrical and Asymmetrical Grid Faults.
  54. Feasibility Analysis of the Positioning of Superconducting Fault Current Limiters for the Smart Grid Application Using Simulink and SimPowerSystem
  55. Flying Capacitor Multilevel Inverter Based Shunt Active Power Filter with Trifling Susceptibility to Divisional Voltages Deregulation
  56. Grid Interconnection of Renewable Energy Sources at the Distribution Level With Power-Quality Improvement Features.
  57. Harmonic orientation of pulse width modulation technique in multilevel inverters
  58. Hexagram-Converter-Based STATCOM for Voltage Support in Fixed-Speed Wind Turbine Generation Systems.
  59. High-Efficiency Regulation Method for a Zero-Current and Zero-Voltage Current-Fed Push–Pull Converter .
  60.  Hybrid Flying-Capacitor-Based Active-Neutral-Point-Clamped Five-Level Converter Operated With SHE-PWM
  61.  Hysteresis Modulation of Multilevel Inverters.
  62. Implementation of Neural-Network-Controlled Three-Leg VSC and a Transformer as Three-Phase Four-Wire DSTATCOM
  63. Improvements in power quality and efficiency with a new AC/DC high current converter (WSEAS transactions on circuits and systems)
  64. Improving grid power quality with facts device on integration of wind energy system.
  65. Induction machine DTC optimization using artificial intelligence for EV’s applications.
  66. Induction Motor Drive Using Seven Level Multilevel Inverter for Energy Saving in Variable Torque Load Application.
  67. Interconnection of Two Very Weak AC Systems by VSC-HVDC Links Using Power-Synchronization Control.
  68. Investigation of SSR characteristics of hybrid series compensated power system with SSSC.
  69. Isolated Buck–Boost DC/DC Converters Suitable for Wide Input-Voltage Range.
  70. Load Compensation for Diesel Generator-Based Isolated Generation System Employing DSTATCOM.
  71. Load compensation for single phase system using series active filter.
  72. Loading Balance of Distribution Feeders With Loop Power Controllers Considering Photovoltaic Generation.
  73. Low Frequency Oscillations Damping by Static Synchronous Series Compensator Equipped with an Auxiliary Fuzzy Logic Controller.
  74. Matrix Converter-Based Unified Power-Flow Controllers: Advanced Direct Power Control Method.
  75. Modeling and analysis of cascaded h-bridge inverter for wind driven Isolated self – excited induction generators.
  76. Modeling and Control of VSC-HVDC Links Connected to Island Systems
  77. Modulation for Three-Phase Transformer less Z-Source Inverter to Reduce Leakage Currents in Photovoltaic Systems.
  78.  Modulation index effect on the 5-level she-PWM voltage source inverter.
  79. Mono-variable and Multivariable Voltage Regulator Design for a Synchronous Generator Modeled With Fixed and Variable Loads.
  80. Multidimensional Two-Level Multiphase Space Vector PWM Algorithm and Its Comparison With Multi frequency Space Vector PWM Method.
  81. Multilevel inverter to reduce common mode voltage in ac motor drives using SPWM technique.
  82. Multilevel inverter, based on multi-stage connection of three-level converters, scaled in power of three.
  83. Neural-Network-Based Integrated Electronic Load Controller for Isolated Asynchronous Generators in Small Hydro Generation 2011
  84. Neutral-Point Potential Balancing of Three-Level Inverters in Direct-Driven Wind Energy Conversion System.
  85. Nine-level inverter system for an open-end winding.
  86. On chip implementation if z-source inverter fed induction motor drive.
  87. Online Efficiency Optimization of a Fuzzy-Logic-Controller-Based IPMSM Drive.
  88. Online Optimal Reactive Power Control Strategy of PV Inverters.
  89. Parallel Operation of DFIGs in Three-Phase Four-Wire Autonomous Wind Energy Conversion System.
  90. Performance Comparison of VSC-Based Shunt and Series Compensators Used for Load Voltage Control in Distribution Systems.
  91. Performance of voltage source multilevel inverter - fed induction motor drive using SIMULINK
  92. Performance Investigation of Neural-Network-Based Unified Power-Quality Conditioner.
  93. Power Quality Conditioner with Series-Parallel Compensation Applied to Single-Phase Systems.
  94. Power quality improvement for electrical system feeding metro subway in EGYPT
  95.  Power quality improvement in dc drives using MATLAB/SIMULINK
  96.  Power Quality Improvement of 1-Φ Grid-connected PWM Inverter using Fuzzy with Hysteresis Current Controller
  97. Power quality improvement of wind turbines using doubly-fed induction machines.
  98.  Power quality improvement using a fuzzy logic control of a series active filter
  99.  Power Quality Improvement Using Interline Unified Power Quality Conditioner.
  100.  Power System Voltage Regulation via STATCOM Internal Nonlinear Control
  101.  Predictive Current Control Implementation in the Sensor less Induction       Motor Drive.
  102.  Primary-Side-Converter-Assisted Soft-Switching Scheme for an AC/AC Converter in a Cyclo-converter-Type High-Frequency-Link Inverter.
  103.  Quasi-Z-Source-Based Isolated DC/DC Converters for Distributed Power Generation 2011.



>> Power Systems Titles  


 >> Wind Projects

>> VLSI Projects


>> Electronics Projects 


>> STATCOM Projects

>> Microprocessor Projects


>> Solar Projects


>> LOAD FLOW Projects

>> ANN Projects


>> DSP Projects    


>> Voltage Stability Projects

>> Power Electronics Projects


>> Fuzzy Projects


>> Reactive Power Projects

>> Mechanical Projects


>> Embedded Projects


>> FACTS Projects

>> PC Based Projects


>> Instrumentation Projects


>> Power Quality Projects

>> Communication Projects


>> Robotics Projects


>> Optimization Projects

>> Biomedical Projects


>> Network Projects


>> ELD Projects

>> Labview Projects


>> Matlab Projects


>> Multi-Objective Projects

>> PSCAD Projects

Projects & Reasearch at ESS                       Online coaching                        Jobs full time and part time at ESS                     Sample videos  

    Training on Embedded Systems               Matlab coaching - Online           our contacts     Tags